|
License-free and
wireless-operates in the2.4 to
2.483 GHz Industrial, Scientific and Medical (ISM) spread spectrum band
Maximum immunity to
interference, even in high noise environments
Factory or field
configured for your application-ensuring trouble-free installation
User configurable for
master, remote,
repeater or repeater/remote mode
Frequency key options
allow for different
systems to operate simultaneously in close
proximity
Rated range of
up to 20 miles (32 km) and
an installed range of up to 30 miles (48 km) with line-of-sight/omni
directional antenna-
further with repeaters
|
 |
| Series SRM6320 of Data-Linc Group |
Data-Linc
Group's SRM6320 wireless Ethernet serial modem provides users an advanced, state-of-the-art blending of Data-Linc’s successful SRM6100
serial and SRM6310E Ethernet modems. The SRM6220 offers Ethernet/IP
to DF-1 connectivity.Similar to Allen-Bradley's Net/ENI, module, the SRM6320 allows for
integration of any DF-1 device into an Ethernet/IP network. Unlike
the Net/ENI, only the modem is required for this integration which
reduces cost and increased efficiency. The accompanying, intuitive SetLinc software makes configuring the ENI function easy.
The SRM6320 meets or
exceeds the prior technology. Its updated features and cutting-edge
auxiliary microprocessor add a broad range of enhanced,
user-friendly features and capabilities. The SRM6320’s backward
compatibility with the SRM6300E and SRM6310E Ethernet modems allows
it to be used as a replacement. It can be used as a serial tunnel Master with SRM6100 modems with series 3.xx
radio firmware.
Modem setup and
configuration have been simplified by Data-Linc’s proprietary
SetLinc TM
software. Configuration via the Ethernet or the dual serial ports
(RS232 or RS485) provides versatility. To further simplify
installation and increase user confidence, the SRM6320 is
“ping-able.” Radio network communication can be readily determined
by pinging the Master or the Remote— an invaluable troubleshooting
feature for determining if the communication link is functioning.
Additional advantages of
the SRM6320 include Ethernet bridging, selectable MAC (Media Access
Control) address filtering and dual Ethernet/CAT5 connectors for
straight or crossover cables. All radio networks form an Ethernet
bridge between Master radio Ethernet devices and one or more Remote
radio Ethernet devices. RF network performance is improved by a
switchable MAC Filter in each radio that learns MAC addresses of
Ethernet devices connected to its wired side and only forwards
packets across the RF link of devices not on the wired side.
Like the prior SRM Family
2.4 GHz modems, the 10+ mile (16 km)* range offers superior
reliability and performance in the license-free band. The SRM6320
utilizes the same high performance, ultra-reliable Smart Spectrum
technology that ensures exceptional data integrity—even in high
noise environments. It continues the SRM Family tradition of
allowing each modem to be configured for Master, Remote, Repeater or
Repeater/Remote mode.The SRM6320’s compact design with optional DIN
rail clip, allows easy mounting. The front panel power and data
connectors give the user immediate connectivity and front-located
LED status lights provide direct visual access to critical
diagnostic information.
Greater range in optimal
conditions with clear line-of-sight, Repeaters and/or higher gain
antennas.
License-free
2.4 GHz Wireless Hybrid Modem Frequency Hopping Spread Spectrum
SRM6320
Specifications
Included
CD. SetLinc configuration software, LincView TM OPC RF network
management software, User Manual
Antenna. Test antenna
Cable. CAT5
Power. Wall mount 115VAC supply, 12 VDC output
Operating Modes
Point-to-point and multipoint mode
Master, Repeater, Remote or Repeater/Remote
Interfaces
Ethernet.
One 10baseT (UTP)— straight and crossover CAT5s
Ethernet bridging
MAC address fi ltering
Pingable— wire or wireless
Serial data port.
Serial-Linc RS232/RS485 screw terminal
Serial data tunneling via UDP
Diagnostics port. RS232
Operational ranges
System gain. 134 dB
Distance. 10 miles (16 km) with omni antennas (with line-of-sight)
Transmitter
RF Output Power. 500 mW maximum, (10 programmable steps)
Modulation. Frequency Hopping Spread Spectrum, GFSK
RF Data Rate. 144Kbps - 188 Kbs
Hop Patterns. 15 (user selectable)
Occupied Bandwidth. 230KHz
Error Correction. 32 bit CRC
RF Encryption. Substitution Dynamic Key
Receiver
Sensitivity. -107 dBm @ 10 -4 raw BER
Selectivity. 40 dB @ fc +/-230 KHz and 60dB @ fc +/- 460 KHz
Maximum data throughput. 115Kbps point-to-point mode assuming 75%
frequency availability
Antenna Interface
Standard. SMA connector
Optional. External omni directional or yagi
FCC power limit. 4 Watts EIRP (36dB) max at antenna
Impedance. 50 Ohms
Configuration
SetLinc
TM
software (Ethernet or serial) or web browser
DC Power Requirements
8 Watts transmit peak
2 Watts receiving
10 to 28 VDC via screw terminal and via Ethernet using a Data-Linc
DC power injector
Diagnostics
Front panel LEDs. Power, RF Link, Output Data, Input Data, LAN Link,
LAN Activity, Mode setup enabled status
LincView
TM
OPC. Diagnostic software for real-time RF network monitoring; via
Ethernet (UDP) or serial Diagnostic port
Operating Environment
Temperature. - 40 to 167 F (- 40 to 75 C)
Humidity. 0 to 95% non-condensing
Enclosure
Standard. NEMA 1, 18 gauge steel; 2.35 X 3.75 X 8.1 in.(6 X 9.5 X 20.6
cm) using mounting brackets
Optional. 2.35 X 3.76 X 6.3 in. (6 X 9.5 X 16 cm) using DIN rail
mounting
Weight. 1.8 lb (0.82 kg)
SRM6320 Enclosure Dimensions
|
