| The world’s
best value multi-product calibrator
If you're constantly being
asked to calibrate more and more with less and less,
Fluke's 9100 Calibration System is the answer you've
been waiting for. Its exceptional performance in both
the analog and digital domain allows it to calibrate an
extremely wide range of test and measurement equipment -
quickly, efficiently and to ISO 9000 requirements.
For the 9100, calibrating
everything from handheld digital multimeters to high
performance digital-storage oscilloscopes is all part of
a day's work.
Take advantage of the
Model 9100's unique procedure mode, which guides
operators step-by-step through the entire calibration
process, and you'll not only calibrate more with less -
you'll do it faster.
The 9100 is a
multifunction calibrator with a breadth and depth of
outputs never before available from a single calibration
source. In addition to DC and AC voltage to 1050V,
variable Resistance to 400MΩ and DC and AC current to
20A (1000A via the optional current coils), the 9100
delivers continuously variable capacitance values to
40mF and conductance values to 2.5 milliSiemens. It also
generates digitally synthesized and phase-locked sine,
square, triangle, impulse and trapezoidal waveforms,
variable amplitude pulses to 10 MHz, pulse widths to 2
seconds, and duty cycles between 0.05% and 99.95%.
Add one of the two
oscilloscope calibration options and it generates all
the waveforms required to calibrate oscilloscopes up to
250 MHz or 600 MHz.
Fit the insulation/
continuity tester option and it synthesizes resistance
values as high as 2GΩ at test voltages up to 1000V. Fit
the power meter option and it simultaneously generates
variable phase angle voltages and currents that allow
you to calibrate power meters up to 1 MW or 1 MVAR.
No other multi-product
calibrator gives you such wide workload coverage and
versatility. Weighing in at only 41 lbs (18.5 kg), it's
also the ideal solution to on-site calibration.
Model 9100 - the low-cost
solution to calibrating:-
- Calibrates over 15 different categories of
general-purpose test equipment
- Options for power meter,
insulation/continuity tester and
oscilloscope calibration - internally
installed and retrofittable
- Semi-automated and fully automated
procedure modes for maximum calibration
throughput
- Fully supported by MET/CAL Plus software
and procedure libraries
- Rapid return on investment
- Intuitive front panel operation for ease
of use
|
|
