|
| |
|
|
|
HSD35-1024MA34, HSD35-1024MA44, Big Stock
for selling.
|
|
|
|
NorthStar Heavy Duty Encoder - Series HSD35
|
|
 Quick Specs...
- Hollowshaft design eliminates mounting bracket, flexible coupling and
install labor
- Bore is electrically and thermally insulated
- Single and dual output (with optional high current line
driver)
- Choice of stamped metal or swivel rod tether
- High resolution unbreakable disk
- Industrial Duty Latching Connector
- NEMA 4 / IP67
- Two Year Warranty
|
|
Overview / Design Principle:
The NorthStar brand Series HSD35 Sealed Hollow shaft
encoder is designed for easy installation on motor or machine shafts.
Its hollow shaft design eliminates the need for a flexible shaft coupling,
mounting bracket, flower pot, or flange adapter. This not only reduces the
installation depth, but also lowers total cost.
The Series HSD35 Sealed Hollow shaft is equipped with an
unbreakable disk that resists contamination and meets the demands of the
most severe shock and vibration generating processes. Its floating shaft
mount and spring tether eliminate bearing loads and flexible shaft couplings
to eliminate wear and maintenance.
Series HSD35 has complete electrical protection from overvoltage,
reverse voltage, and output short circuits. In addition, the Series HSD35 is
not only electrically & thermally isolated, but also environmentally
sealed withshaft seals at both sides.
Features and Benefits:
Mechanical
- Unbreakable code disks for 1 to 2048 PPR
- Flexible mounting
- Minimizes bearng loads
- Heavy duty shaft seals; optional extra heavy duty rugged shaft seals
- Sealed connector - no soldering
- Insulated from motor housing/shaft temperatures at or above 125¡ãC
- Direct shaft size minimizes wobble caused by universal inserts
Electrical
- Overvoltage, reverse voltage, & output short circuit protection
- Noise immunity to EN50082-2
- Bore is electrically isolated from shaft currents
- Cast housing maximizes noise immunity and durability
|
| Code: |
Optical
Incremental |
| Pulses
per Revolution: |
1-2500 |
| Phasing
Sense: |
A leads B for Clockwise
rotation (CW) viewing shaft clamp end |
| Quadrature
Phasing: |
90¡ã ¡À 22.5¡ã |
| Symmetry: |
180¡ã ¡À 18¡ã |
| Index: |
180¡ã ¡À 18¡ã |
| Input Voltage Requirement: |
5-26 Volts DC |
| Current
Requirement: |
100 mA typical plus
line driver load |
| Output
Signals: |
With Elec Option 0, 1, 2,
4, A & B: 5-26 V Line Driver, 40mA
With Elec Option 3: 5 V Line Driver, 40mA
With Elec Option 5: 5 V Line Driver, 100mA
With Elec Option 6: 5-15 V Line Driver, 100mA |
| Frequency
Response: |
0 - 100kHz Data & Index |
| Electrical
Immunity: |
1kV ESD, Reverse Polarity,
Short Circuit |
| Connector: |
10 pin industrial duty
latching, sealed NEMA 4 &12, IP65 |
| Shaft Speed: |
3,600 RPM; Max
up to 3600 RPM |
| Mounting
Configuration: |
Flexible mount with
anti-rotation arm |
| Housing
Material: |
Stainless steel and epoxy
coated zinc alloy |
| Available
Shaft Sizes: |
6 mm to 1.25¡± thru-shaft
style available. See ordering table for sizes. |
| Allowable
Shaft End-Play: |
¡À 0.050¡± |
| Allowable
Shaft Runout: |
0.025¡± TIR (Subject to
RPM Limitation) |
| Operating Temperature Range: |
-40¡ãC to +70¡ãC |
| Storage
Temperature Range: |
-40¡ãC to +90¡ãC |
| Humidity: |
to 98% RH (non-condensing) |
| Shock: |
50 Gs for 11 ms |
| Vibration: |
18 Gs @ 5-2000 Hz spectrum |
|
|
|
|
|
|
RIM SS2 Signal Splitter - NorthStar
|
|
Quick Specs...
- Eliminates the need for two encoders
- Routes signals to multiple locations, repeats and amplifies
- Provides two independent, isolated 5-26 VDC line driver outputs
- Compatible with virtually all incremental encoders
- More information...
¡¡
|
|
Overview / Design Principle:
The RIM SS2 Signal Splitter will accept 4-26 VDC signals and provide two
independent and completely isolated line driver outputs of 5-26 VDC based on
user defined voltage levels. Its optically isolated inputs accept quadrature
or single channel inputs, with or without their complements, from
differential line drivers, open collector, and even from proximity probes.
The Signal Splitter also has the ability to repeat and amplify signals.
Each output of the Signal Splitter is user definable from 5 to 26 VDC. In
addition to short circuit protection, outputs are ESD protected according to
MIL-STD-883. Each connector of the Signal Splitter is equipped with two
positions for +VCC and common, as well as two extra field accessible tie
points, making power supply connections simple and quick. Capable of driving
the output signal up to 26 VDC, the Signal Splitter will also function with
either output disconnected.
Features and Benefits:
- Eliminates the expense and maintenance of two separate encoders
- Optically isolated outputs can be sent to a motor drive and a display
at the same time
- Compatible with virtually every incremental digital encoder
- Combats long distance and electrical interference problems
|
|
|
|
|
|
|
¡¡ |
