| Compact
Programmable Display GT10
The 4-inch wide screen serves as a message display and control
panel in small spaces.
-
4 inch mono-chrome
3 color LED
16 chars.×6 lines
160×64 dots
Matrix switch 20×8
RS232C
Pass-through function
24V DC
CE/cUL
The 4-inch wide screen serves as a display and
control panel.
Small in size but features a high-resolution touch
panel with 20 horizontal and 8 vertical segments, allowing you to
freely position many switches. The screen is wide enough to use in
split mode, which extends the variety of uses.
-
Ultra-thin body with a 32-mm depth
The panel depth is only 32 mm (including the
mounting bracket). This ultra-thin body saves space for
installation.
-
Excellent maintainability
The backlight source is LEDs, which require no
troublesome replacement work.
In addition, battery replacement is not required
because screen data is stored in flash ROM, and the other data is
backed up* by a built-in secondary battery.
You can use it for a long time with minimum
maintenance.
*10 days or more on a full charge. (Varies with
your operation conditions.)
Displays up to 96 TrueType font characters.
Display of 10×10 dot characters was achieved by
adopting TrueType fonts. This substantially increased the number
of characters that can be displayed on the screen at a time to 6
lines at 16 characters per line. It also increased the flexibility
in the size of parts, such as switches, allowing detailed screen
display designs.
-
Supports either a portrait or landscape
display.
The portrait or landscape display can be switched
by a simple setting on GTWIN. This allows you to install the
display unit in any place you want without affecting the target
equipment design.
-
-
Features a pass-through function useful for
debugging (Refer to GT01.)
Equipment status display by the 3-color LEDs
(Refer to GT01.)
Multilingual (Refer to GT01.) |
