| Options
Wiring Tools
|
Terminal screwdriver
|
Molex connector pressure contact tool
|
Multi-wire connector pressure contact
tool
|
|
AFP0806
|
AFP0805 (Molex: 57189-5000)
|
AXY52000
|
|
Necessary when wiring relay output type
and terminals block (Phoenix).
|
Necessary when wiring connector type and
relay output type.
|
Necessary when wiring transistor output
type connectors.
|
|
 |
 |
 |
Parts For Mounting
|
Slim type mounting plate
|
Flat type mounting plate
|
|
AFP0803 (set of 10)
|
AFP0804 (set of 10)
|
|
Screw-stop attachment plate. Slim model.
|
Screw-stop attachment plate. Flat model.
|
|
 |
 |
I/O Cables
|
Relay output Molex type I/O cable
(Length: 1 m 3.281
ft.)
2 cable set
|
Relay output Molex type I/O cable
(Length: 3 m 9.843
ft.)
2 cable set
|
|
AFP0551
|
AFP0553
|
|
Loose-wiring cable (9 leads) AWG20, with
Molex socket attached at one end, 0.5 mm2,1
set: 2 cables (blue and white).
|
Loose-wiring cable (9 leads) AWG20, with
Molex socket attached at one end, 0.5 mm2,1
set: 2 cables (blue and white).
|
|
 |
|
|
Transistor output type I/O cable
(Length: 1 m 3.281
ft.)
2 cable set
|
Transistor output type I/O cable
(Length: 3 m 9.843
ft.)
2 cable set
|
|
AFP0521
|
AFP0523
|
|
Wire-pressed terminal cable (10 leads)
AWG22, 0.3 mm2 with connectors attached at one
end, 1 set: 2 cables (blue and white).
|
Wire-pressed terminal cable (10 leads)
AWG22, 0.3 mm2 with connectors attached at one
end, 1 set: 2 cables (blue and white).
|
|
 |
|
Notes:
· One I/O cable set (2 cables) is necessary with
the following models: FP0-C10R, C14R, E8R, E16R
· One I/O cable set (2 cables) is necessary with
the following models: FP0-C16/E16X/E16T/E16P/E16Y
· Two I/O cable sets (total 4 cables) are
necessary with the following models: FP0-C32/E32
Flat Cable Connector
|
AXM110915
|
|
If you are using flat cable connector,
request the part specified below for a connector with an
asymmetrical design to prevent mistaken polarity.
|
|
-
|
Additional Parts
|
Terminal socket
|
Molex socket
|
FP0 Wire-press socket
|
|
AFP0802 (2 sockets per pack)
|
AFP0801 (2 sockets per pack)
|
AFP0807 (2 sockets per pack)
|
|
Attaches to relay output and terminal
block type.
Additional part
|
Attaches to relay output and Molex
connector types.
Additional part
|
Attaches to transistor output type.
Additional part
|
|
 |
 |
 |
|
Power cable for FP0
|
-
|
-
|
|
AFP0581 (1 cable per pack)
|
-
|
-
|
|
Attaches to control unit and relay output
type expansion unit.
Additional part Length: 1 m 3.281ft.
|
-
|
-
|
|
 |
-
|
-
|
|
