NAIS PLC│FPM│FP-M(C20R/C20T/C32T)--Features

In anticipation of connection to operation display panel and linkage with upper grade PLCs, the model equipped with RS232C port is standardized. In addition, a clock/calendar function is equipped for necessity of timer control.

(Only for the part numbers which end in C.)

3. RAM/ROM-switchable type program memory

RAM is adopted as internal memory. Optional ROM is also available for program copy and backup memory.

4. Terminal array for easy wiring

Power to I/O circuit is supplied from the internal circuit. No-voltage input is possible at the input side, and the sensor power supply is also supplied. (C20T/C32T)

2. Power supply and I/O Specifications

Item	Description
Power supply	24 V DC ^note)
Input	24 V DC
Output	Relay 2 A/ Transistor 0.8 A (varies with different models)

Note) 12 V DC models are also available in some models.

3. Performance Specifications

Item		Description (Relay output / Transistor output)
Number of I/O points		20 points / 20 points, 32 points ^{note 1)}
Expansion		Max. 4 boards Total points; 100/192 points ^{note 1)}
Operation speed		1.6 µs/step
Internal memory		RAM (Not included the optional ROM)
Memory capacity		2.7 k steps / 5 k steps ^{note 2)}
Operation memory	Internal relay	1,008 points
	Timer/Counter	144 points in total
	Data register	1,660 words/6,144 words ^{note 2)}

Notes

1) Relay/Transistor output

2) Standard model/model with RS232C port

4. Applicable Functions

Item	Description
Pulse catch input	8 points in total
Interrupt input	8 points in total
Analog I/O	Available by adding expansion A/D and D/A boards
Volume input	2 points
High speed counter	2 points (ch 0: 1 phase 10 kHz / 2 phases 10 kHz ch 1: 1 phase 2.5 kHz / 2 phases 2 kHz ^note))
Pulse output	2 points (max. 4.9 kHz)
RS232C port	This is mounted on the model having part numbers which end in C. D sub 9-pin connector

Note) ch 1 is available for CPU Ver. 2.D or later.

5. Applicable Network Functions

Item	Description
Remote I/O	Max. 128-input and 96-output points can be controlled by adding transmitter master board. Available as a slave station of MEWNET-F by adding I/O link board.
Inter-PLC link	I/O link with mating station of FP-M, FP1 or FP3 is possible by adding transmitter master board.
Computer link	Available by adding a tool port and C-NET adapter. For C type, RS232C port can be used for com-puter link.
Modem connection	Available. Model with RS232C port can also send data.

6. Other Built-in Functions

Item	Description
Program block-edit during RUN	Available (CPU Ver.3.0 or later)
Constant scan	Available
Adjustable input time filtering	Available, from 1 to 128 ms
Clock/Calendar function	This is built in the control unit having part numbers which end in C. AFC*****C-F

Supplier:   JonWeb Technology Trade CO.,LTD
Room 902, Shangdi Garden 23, Shangdi East Road, Haidian District, Beijing, China (Zip: 100085)
Easy Call: +86-13001958500 (24hours Hotline) ,    Tel: +86-10-62988280 / 86360099,      Fax: +86-10-62985883
MSN:    cn5130@hotmail.com   /   Email: ZhengJon@Yahoo.com    / Skype Chat ID:   japanfa.com

Stronger on: Siemens PLC / Siemens Inverter / Siemens HMI , Mitsubishi PLC / Mitsubishi Inverter / Mitsubishi AC Servo , Fuji AC Servo , Semiconductor / IGBT / Diode , Allen Bradley / Allen Bradley PLC, VIPA PLC / VIPA HMI , Yaskawa Inverter , PLC Cables , Cisco / Cisco Router / Cisco Switch, UPS / APC UPS , Latex Pillows / Latex Mattress , STR2020 Etec.