|
| |
| > Products Center > Nais PLC
> FPM > |
| |
| 1.
Control Boards
1) Control boards are available in three
types - C20R, C20T and C32T - according to the number of I/O
points and type of output. C type which is equipped with a
clock/calendar function and RS232C port is available for
each of the three types.
2) Program capacity
|
Type
|
Program capacity
|
|
C20R/C20T/C32T
|
2,720 steps
|
|
C20RC/C20TC/C32TC
|
5,000 steps
|
Note The type with 12 V power supply voltage
is also available.
-
C20R(AFC12212-F)/C20RC(AFC22212C-F)
DC input 12 points/Relay output 8 points
Equipped with PA relay
-
C20T(AFC12242-F[NPN],
AFC12252-F[PNP])/C20TC(AFC22242C-F[NPN],
AFC22252-F[PNP])
DC input 12 points/Transistor output 8
points
-
C32T(AFC12342-F[NPN],
AFC12352-F[PNP])/C32TC(AFC22342C-F[NPN],
AFC22352C-F[PNP])
DC input 16 points/Transistor output 16
points
|
|
|
| 2.
Expansion Boards
Expansion is possible up to maximum 4 boards
or maximum 192 points in terms of I/O points.
The expansion board can be selected among
the types as shown at right, depending on the I/O balance
and type of output.
Note: The type with 12 V power supply
voltage is also available.
-
FP-M-E20R expansion
I/O board (AFC13012-F)
DC input 12 points/Relay output 8 points
Equipped with PA relay
-
M1T-E expansion I/O
board (AFB6342-F[NPN], AFB6342P-F[PNP])
DC input 24 points Transistor output 16
points
-
M1T-EI expansion
input board (AFB6392-F[+COM.])
DC input 36 points
-
M1T-EO expansion
output board (AFB6340-F[NPN], AFB6345-F[PNP])
Transistor output 32 points
|
|
|
| 3.
Intelligent Boards
The board for input/output of analog data
are available.
They can be used for capture of the data of
displacement sensor and inverter control.
-
Analog I/O board
(AFB6480)
Analog input: 4 channels, analog output:
1 channel
Range: Voltage: 0 to 5 V, 0 to 10 V
Current: 0 to 20 mA
Resolution: 8 bits (K0 to K255)
-
M1T A/D converter
board (AFB6400)
Analog input 4 channels
Range ... Voltage 0 to 5 V, 0 to 10 V
Current 0 to 20 mA
Resolution ... 10 bits (K0 to K1000)
-
M1T D/A converter
board (AFB6410)
Analog output 2 channels
Range ... Voltage 0 to 5 V, 0 to 10 V
Current 0 to 20 mA
Resolution ... 10 bits (K0 to K1000)
|
|
|
| 4.
Boards and Adapters for Network
Special boards and adapter are available
each for remote I/O, I/O linking with host
PLCs and small-scale computer network C-NET.
-
FP-M transmitter
master board (AFC1752)
For remote I/O and I/O link (compatible
with MEWNET-TR)
-
FP-M I/O link board
(AFC1732)
For I/O link to host PLC (Compatible
with MEWNET-F)
-
C-NET adapter S2 type
(AFP15402)
Computer link, for FP-M side
Equipped 30 cm 11.811
inch - special cable
(Power supply is not required.)
-
C-NET adapter
(AFP8536/AFP8532)
Computer link, for computer side
Power supply...AC/DC
|
|
|
|
|
