|
| |
| > Products Center > Nais PLC
> FPM > |
| |
1.
Optional Memories
-
Memory (EPROM)
For program saving and ROM operation
Two EPROMs (equivalent to 27C256A) per
set
Write is performed by commercially
available ROM writer.
Part number: AFP5202 (Two in set)

-
Master memory (EEPROM)
For program copy and transmission
One EEPROM (equivalent to X28C256PI-20)
Write is performed by setting the master
memory into FP-M.
Part number: AFP5207 (One in set)

|
|
|
2.
Mounting Parts (Kit with case type includes these parts.)
-
Control board case
To be set to the top of a kit with case
4 spacers (AFB88032) for case setting
are attached.
For C20R
Part number : AFC18011
For C20T
Part number : AFC18012
For C32T
Part number : AFC18013

-
Expansion I/O board
case
To be set to the middle of a kit with
case.
4 spacers (AFB8803) for case setting are
attached.
Part number: AFC1802

-
Skirt case
To be set to the bottom of a kit with
case.
4 spacers (AFB8803) for case setting are
attached.
Part number: AFC1803

-
Mounting plate
Metal plate on which FP-M is fixed
4 board mounting M3 screws are attached.
DIN rail is mountable.
Part number: AFB6804

-
Nameplate for
expansion I/O board case
Nameplate indicating I/O number of the
I/O LED.
It should be installed at the side of
the expansion I/O board when a kit is assembled.
For E20R
Part number: AFC18062
For M1T-E
Part number: AFC18061
For M1T-EI
Part number: AFC18063
For M1T-EO
Part number: AFC18064

|
|
|
3.
Additional Parts
-
Spare battery
Equivalent to BR2032/CR2032
Part number: AFB8801

-
Power supply cable
Attached to control board
Part number: APL9511

-
Power supply jumper
cable
Attached to control board
Jumper cable for 5 stacks of board (Cut
off the excess.)
Part number: AFB8505

-
Spacer (attached to
case)
For fixing of the bottom board (square
shape, 8 mm .315 inch long,
one spacer)
Part number: AFB88032
For fixing of the top and middle board
(convex shape, 18 mm .709 inch
long, one spacer)
Part number: AFB8803

-
Spacer (Attached to
board)
For fixing of the top board (square
shape, 20 mm .787 inch
long, one spacer)
Part number: AFB88021
For fixing of the middle and bottom
board (convex shape, 20 mm .787
inch long, one spacer)
Part number: AFB8802

|
|
|
|